Nuovo impianto frenante

As we all know, the Transalp front brake is not really bad, you may always be able to brake down the bike safely. But:

  1. it takes some amount of power in your right hand to do so
  2. you donīt have a real good feeling for the brake, caused by the relatively weak stock brake hose.
  3. the rotor suffers from a relatively fast wear out, especially if you are using bad brake pads. And to replace it with a genuine Honda part, will cost you one ton of money. Latest info is: DEM 700.- (US$ 438.-) for the rotor.
  4. many people claim about the front fork winding while braking. Yes, it does, but once you are used to it, you may not care about. Ok, I donīt, I donīt know what you do. Anyway, to stop this fourth point, is a matter of a complete brake reconstruction, including the front fork. Or purchasing the new ī97 model with double rotor brake.

The other points have a solution: A braided steel brake hose will solve the problems no. 1 and 2, and an aftermarket rotor by, f.e., Brembo or Spiegler solves at least the pricing problem (have a look at the brakes page).

I did both, I purchased a Spiegler braided steel brake hose and Brembo cast iron rotor. First I mounted the new hose and used it with the old rotor, in order to find out, if and how the use of such a braided steel hose would enhance the brake power. Friends, I tell you, this was one of the best investments I ever did on a bike. At last I have a good feeling for the brake, and it takes a remarkably less amount of hand power to brake down the bike. And it works perfectly together with the Brembo rotor. Did you ever manage to perform a "stoppie" with a Transalp? I did. And I did it ten times one after the other, and there was no fading.

The Brembo cast iron rotor and
the Spiegler brake hose		 The new brake hose

Torna alla pagina dei freni
Torna alla pagina TransAlp & C.